1/4'' Shank, 1/8'' Radius X 3/8'' High Round Over Bit

1/4'' Shank, 1/8'' Radius X 3/8'' High Round Over Bit Reviews

Other Picture

1/4'' Shank, 1/8'' Radius X 3/8'' High Round Over Bit Feature

• Cutters made from K10 and K20 grade carbide for clean cutting action.
• Precision balanced for smooth operation.
• Baked-on anti-stick coating to reduce pitch and resin buildup.
• Final sharpening with 600 - 800 grit diamond wheels.
• Unconditionally guaranteed.

Top quality router bits that meet the high standards of Rockler Woodworking and Hardware.

A fantastic value on high quality router bits. These bits are competitively priced while offering high performance and long life.
Quality performance features include: K10 and K20 grade carbide for clean cutting action. Final sharpening with 600 - 800 grit diamond wheels. Precision balanced for smooth operation. Baked-on anti-stick coating to reduce pitch and resin buildup.

Router Safety Tips: It's easy to prevent mishaps if you take a few simple precautions. 1) Rockler recommends using 1/2" shank router bits whenever possible. 1/2" shanks provide better stability with less vibration to produce a smoother cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the collet. Here's a rule of thumb: fully insert the bit, then pull it back 1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router. Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 30, 2011 01:20:08